Philips Avent SCF356 User Manual page 11

7 When the entire progress indicator lights up continuously, the milk
has reached the set end temperature.
When the milk is warm, you can either take the bottle out of the
,
baby bottle warmer to feed your baby right away (see section
'Feeding your baby immediately') or you can keep it warm in the
baby bottle warmer (see section 'Keeping milk warm').
Feeding your baby immediately
1 Press the on/off button to switch off the appliance and take out the
milk bottle (Fig. 9).
2 Always check the temperature of the milk before you feed your
baby. Gently swirl the milk in the bottle and check the temperature
of the milk by sprinkling a few drops on the inside of your
wrist (Fig. 10).
Keeping milk warm
1 When the milk has reached the desired end temperature, the baby
bottle warmer automatically switches to a keep-warm mode. In this
mode, the milk is kept at the set temperature for 20
minutes (Fig. 11).
2 The baby bottle warmer switches off automatically after 20
minutes. The progress indicator switches off to indicate that the
milk is not kept at the desired end temperature anymore (Fig. 12).
Note: If you want to feed your baby with milk at the set temperature, you
need to take the milk bottle out of the baby bottle warmer and feed it to
your baby right after the baby bottle warmer switches off, otherwise the milk
cools down.
Note: You cannot prolong the keep-warm mode of the baby bottle warmer.
Caution: It is not recommended to reheat breast milk twice, as bacteria
start to develop in the milk.
ENGLISH
11