Advertisement
Before attempting to move the dehumidifier, empty the contents of the collection tank. See section 4.1.4.
9
Use top carrying handle when moving unit.
9
Switch off and disconnect it from the mains before attempting any cleaning or other maintenance work.
9
Ensure that the dehumidifier is correctly turned off when not in use, and stored in a safe, dry area, out of reach of children.
9
NOte: This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack
of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person
responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
2.
iNtrOduCtiON
i
Compact, efficient, portable unit that extracts up to 10 litres of water per day. Removes excess moisture from air to prevent build-
up of mildew and mould. Features an adjustable timer ranging from 1-24 hours. digital control panel for simple and smooth operation.
Refrigerant is environmentally friendly R290. Supplied with 3A 3-pin plug and drain hose for continuous operation.
3.
SPeCifiCAtiON
i
model: .......................................................................SdH102
Supply: ........................................................ 220V-240V/50Hz
Rated input/current:...............................................200W/1.1A
Condensate tank: ............................................................ 1.8lt
dehumidifying capacity: ............................................ 10lt/day
maximum airflow: .......................................................80m
nett weight: .................................................................... 10kg
Refrigerant/Charge: .................................................R290/40g
Working space: .............................................................. 12m
Working Temperature: .................................... >=5
Body size (W, d, H): ................................296 x 217 x 416mm
noise: ........................................................................ 40dB(A)
4. OPerAtiON
NOte: empty water tank before every use.
NOte: during operation keep doors and windows closed.
NOte: Place the unit in the area to be dehumidified ensuring that inlet and outlet grilles are unobstructed and that the unit is
positioned as stated in section 1.2. Close all doors and windows
fig.1
4.1.
OPerAtiNG fuNCtiONS
4.1.1.
dehumidifYiNG
4.1.1.1. Turn machine on (fig1.5). The humidity setting and fan speed can only be selected whilst in Auto mode. Press humidity setting control
(fig.1.4) (default humidity setting is 50%). Humidity settings range from 30% to 80% and can be selected in 5% increments by repeated
pressing of the humidity setting control. Select required fan speed (fig.1.2).
If the room humidity is 5% greater than set value the unit will start. If the room humidity is 5% less than the set value the unit will stop.
The Display (fig.1.7) will display the current humidity level when running. Options selected will be highlighted. If Mode is set to
'Continuous' the fan defaults to high speed and cannot be changed.
4.1.2.
iNSide drYiNG (prior to long term storage).
4.1.2.1. Turn machine on (fig.1.5). Press Inside drying control (fig.1.6) and the machine will start internal dehumidifying process. The display
panel (fig.1.7) displays 'Cl' and the Inside drying function LED will flash. This process will take about 1 hour and no other function is
available in this mode. It is possible to switch off the process or power off the unit at anytime during this period.
4.1.3.
timiNG fuNCtiONS
4.1.3.1. Timed operation: Turn machine on (fig.1.5) Set Humidity(fig.4), Fan(fig.1.2) and Mode(fig.8). Press Timer control (fig.1.1). Press Time
control again (fig.1.1) to select between 1 and 24 hours in 1 hour increments. After set time the unit will switch off.
4.1.3.2. Timed delay operation: Press Timer control (fig.1). Press Time control again (fig.1.1) to select between 1 and 24 hours in 1 hour
increments. Select Mode (fig.1.8) and Fan speed (fig.1.2). Select Humidity level (fig.1.4). After set time the unit will switch on.
4.1.4.
drAiNAGe
4.1.4.1.
Water tank:
When the water tank is full the warning light on the control panel (fig.1.3) will flash, the unit will stop working and a buzzer will
sound.
To remove the water tank first remove lower front cover by gently pulling it from both sides using grip recesses to pull it.
© Jack Sealey limited
this product contains fluorinated greenhouse gases. This product is
hermetically sealed. refrigerant: r290 GWP: 3
Additional warning for appliances with r290 refrigerant gas
(refer to the ratings plate for the type of gas used)
/hr
3
CAutiON: riSK Of fire.
2
reAd mANuAl CArefullY BefOre uSiNG the APPliANCe.
C, <=35
C
0
0
r290 refrigerant gas complies with european environmental
directives.
this appliance contains approximately 40g of r290 refrigerant gas.
Appliance shall be installed, operated and stored in a room with a
floor area larger than 2m².
Original Language Version
Item
description
1
Timer setting
2
Fan speed
3
Container full warning light
4
Humidity setting control
5
on/off
6
Inside drying function
7
display (humidity/time)
8
mode key (Auto/Continuous)
SdH102 Issue 1 07/11/18
Advertisement
