Dust Extraction - DeWalt DW616 Instruction Manual

Cutting with the Plunge Base (Fig. 8)
ACAUTION: Turn the router on before plunging the cutter head into the workpiece.
1. Unlock the plunge lock lever (R).
2. Plunge the router down until the bit reaches the set depth.
3. Lock the plunge lock lever (R).
4. Perform the cut.
5. Unlock the plunge lock lever. This will allow the router bit to disengage the work.
. 6. Turn the router off.
F I G . 8
Dust Extraction (Fig. 1OI
h,CnUnOlt: Turn the router off and disconnect it from the power supply.
To connect the router to a vacuum cleaner for dust extraction, follow these sreps:
1. Remove the dust cap (T) by pulling straight up.
2. Insert the dust extraction hose adapter (JJ) into the dust extraction pod (KK) as shown.
3. Insert the end of a standard vacuum cleaner tube (LL) into the hose adapter.
4. When using dust extraction, be aware of the placement of the vacuum cleaner. Be sure that
the vacuum cleaner is stable and that its hose will not interfere with the work.
F l G . 1 0