National Instruments NI USB-7845R Getting Started Manual
Hide thumbs
Also See for NI USB-7845R:
- User manual (15 pages) ,
- User manual (15 pages) ,
- Note to users (11 pages)
Table of Contents
Advertisement
Quick Links
GETTING STARTED GUIDE
NI USB-7845R
R Series for USB Multifunction RIO with Kintex-7 70T FPGA
Français
This document explains how to install and configure National Instruments NI USB-7845R.
Safety Guidelines
Caution
manual. Product misuse can result in a hazard. You can compromise the safety
protection built into the product if the product is damaged in any way. If the product
is damaged, return it to National Instruments for repair.
Electromagnetic Compatibility Guidelines
This product was tested and complies with the regulatory requirements and limits for
electromagnetic compatibility (EMC) as stated in the product specifications. These
requirements and limits are designed to provide reasonable protection against harmful
interference when the product is operated in its intended operational electromagnetic
environment.
This product is intended for use in residential, commercial, and industrial locations. However,
harmful interference may occur in some installations or when the product is connected to a
peripheral device or a test object. To minimize interference with radio and television reception
and prevent unacceptable performance degradation, install and use this product in strict
accordance with the instructions in the product documentation.
Furthermore, any changes or modifications to the product not expressly approved by National
Instruments could void your authority to operate it under your local regulatory rules.
Caution
snap-on ferrite bead onto the DC power cord of the power supply as described in this
document.
Caution
shielded cables and accessories.
Deutsch
ni.com/manuals
Do not operate the NI USB-7845R in a manner not specified in this user
To ensure the specified EMC performance, you must install the included
To ensure the specified EMC performance, operate this product only with
한국어
日本語
简体中文
Advertisement
Table of Contents
Related Manuals for National Instruments NI USB-7845R
Summary of Contents for National Instruments NI USB-7845R
- Page 1 Safety Guidelines Caution Do not operate the NI USB-7845R in a manner not specified in this user manual. Product misuse can result in a hazard. You can compromise the safety protection built into the product if the product is damaged in any way. If the product is damaged, return it to National Instruments for repair.
- Page 2 Verify that the following components are in your kit. Figure 1. Kit Contents for the NI USB-7845R 1. Module 4. NI-RIO Media 2. USB Cable 5. Power Supply 3. Ferrite Bead 6. Getting Started Guide 2 | ni.com | NI USB-7845R Getting Started Guide...
- Page 3 USB modules can be connected directly to the host PC, to a powered USB hub, or to an NI PXI or PXI Express chassis featuring a USB port. Connect the USB cable to the NI USB-7845R using the cable device port. Connect the other end of the USB cable to the host PC, powered hub, or chassis.
- Page 4 Turn the power switch on the NI USB-7845R to the on position. USB Device Security Cable Slot The security cable slot allows you to attach an optional laptop lock to your NI USB-7845R. Note The security cable is designed to act as a deterrent, but might not prevent the device from being mishandled or stolen.
- Page 5 NI is not liable for connections that exceed any of the maximum ratings of input or output signals on the NI USB-7845R and on the computer chassis. For the maximum input and output ratings for each signal, refer to the NI USB-7845R Specifications, available at ni.com/manuals.
- Page 6 Refer to the following figure for information about other product tasks and associated resources for those tasks. Worldwide Support and Services The National Instruments website is your complete resource for technical support. At ni.com/ support, you have access to everything from troubleshooting and application development self-help resources to email and phone assistance from NI Application Engineers.
- Page 7 National Instruments corporate headquarters is located at 11500 North Mopac Expressway, Austin, Texas, 78759-3504. National Instruments also has offices located around the world. For telephone support in the United States, create your service request at ni.com/support...
- Page 8 Other product and company names mentioned herein are trademarks or trade names of their respective companies. For patents covering National Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the file on your media, or the National Instruments Patent Notice at .
Need help?
Do you have a question about the NI USB-7845R and is the answer not in the manual?
Questions and answers