Download Print this page
Sealey GSA28 Instructions For Use

Sealey GSA28 Instructions For Use

Air nibbler

Advertisement

Quick Links

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions and
properly maintained, give you years of trouble free performance.
IMPORTANT: Please reaD tHese instructions carefully. note tHe safe oPerational reQuireMents,
WarninGs anD cautions. use tHis ProDuct correctly anD WitH care for tHe PurPose for WHicH
it is intenDeD. failure to Do so May cause DaMaGe anD/or Personal inJury anD Will inValiDate
tHe Warranty. Please KeeP instructions safe for future use.
1.
safety instructions
 WarninG! Ensure Health & Safety, local authority, and general workshop practice regulations
are adhered to when using this equipment.
 WarninG! Disconnect from air supply before changing the punch and die, servicing or
performing maintenance.
 Maintain the nibbler in good condition (use an authorised service agent).
 Replace or repair damaged parts. Use genuine parts only. Unauthorised parts may be
dangerous and will invalidate the warranty.
 Use in suitable clean and tidy work area,
free from unrelated materials. Ensure there is
adequate lighting.
 WarninG! Always wear approved eye or face
and hand protection when operating the nibbler.
 Remove ill fitting clothing. Remove ties, loose
jewellery, and contain and/or tie back long hair.
 Wear appropriate protective clothing and keep
hands and body clear of working parts.
 Maintain correct balance and footing. Ensure
the floor is not slippery and wear non-slip shoes.
 Keep children and unauthorised persons away from the work area.
 Check moving parts alignment on a regular basis.
 Ensure workpiece is secure before operating the nibbler. Never hold a workpiece by hand. Use
a vice or clamps.
 WarninG! Ensure correct air pressure is maintained and not exceeded. Recommended
pressure 90psi.
 Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each use
and ensure that all connections are secure.
 Prolonged exposure to vibration from this nibbler poses a health risk. It is the
Employer's/Owner's and operator's responsibility to correctly assess the potential hazard and
issue guidelines for safe periods of use and offer suitable protective equipment.
 DO NOT use any power source except an air compressor.
 DO NOT operate the nibbler near any inflammable substance or on any container that once
contained an inflammable substance.
 DO NOT use the nibbler for a task it is not designed to perform.
 DO NOT operate nibbler if any parts are damaged or missing as this may cause failure and/or
personal injury.
 DO NOT carry the nibbler by the hose, or yank the hose from the air supply.
 DO NOT operate nibbler when you are tired or under the influence of alcohol, drugs or
intoxicating medication.
 DO NOT carry the nibbler with your finger on the trigger.
 DO NOT direct air from the air hose at yourself or others.
 When not in use disconnect from air supply and store in a safe, dry, childproof location.
Original Language Version
INsTRUCTIONs fOR:
air nibbler (G3)
Gsa28
MODEl No:
GsA28 Issue: 2 - 30/10/09

Advertisement

loading

Summary of Contents for Sealey GSA28

  • Page 1 Gsa28 MODEl No: Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: Please reaD tHese instructions carefully. note tHe safe oPerational reQuireMents, WarninGs anD cautions.
  • Page 2 This duration of use should be reduced if the individual is exposed to hand-arm vibration from other sources. introDuction & sPecification sealey’s Generation or G3 series of air tools represents some of the best design innovations in air tools of recent date. The tools feature contoured, soft-grip handle and housing which help reduce the effects of vibration and chill –...
  • Page 3 If the air system does not have an oiler, lubricate the air nibbler daily with a few drops of the air tool oil supplied, dripped into the air inlet before use. ( To re-order air tool oil use sealey part Nos. ATO/500 or ATO1000.)

This manual is also suitable for:

G3 series