Advertisement
Quick Links
Advertisement
Related Manuals for Santon Aqualine ALK02
Summary of Contents for Santon Aqualine ALK02
- Page 1 September 2015 Aqualine Unvented Electric Water Heating...
- Page 2 Capacity of Number of Water Heater Basins 7 litres 10 litres 15 litres Note: These figures are for guidance only and local conditions should be taken into account when sizing the installation. SPECIFICATION ADVICE: 01603 420128 Fax: 01603 420229 E-MAIL: specifier@santon.co.uk...
- Page 3 A typical installation of a Santon Aqualine without expansion kit For inlet water pressure above 4.1 bar (using kit ALK01) For installations where any of the above conditions cannot be met, an expansion vessel and other relevant accessories must be used to accommodate expansion.
- Page 4 Connections contamination of the inlet water. • Expansion vessel ½" BSP male. • Expansion relief valve inlet ½" BSP male, discharge ½" BSP female. • Non-return valve 15mm x 15mm compression. SPECIFICATION ADVICE: 01603 420128 Fax: 01603 420229 E-MAIL: specifier@santon.co.uk...
-
Page 5: Technical Specification
BS OHSAS 18001:2007 and ISO 50001:2011 registered factory. If the inlet water pressure is in excess of 4.1 bar, it is essential that the Santon unvented kit ALK01 is also installed with the heater. Warranty This kit comprises expansion vessel, expansion relief valve, non-return valve and pressure reducer/strainer. - Page 6 A nationwide network of experienced engineers is available to provide fast and efficient on-site service support if required. Spare parts for Santon products are readily available through a network of approved spares stockists. Santon, Hurricane Way, Norwich, Norfolk, NR6 6EA Specification Advice Hotline Tel: 01603 420128 Fax: 01603 420229 E-mail: specifier@santon.co.uk...
Need help?
Do you have a question about the Aqualine ALK02 and is the answer not in the manual?
Questions and answers