Troubleshooting; What Should I Do If The Ni 4080/4081/4082 Doesn't Appear In Max - National Instruments NI PXIe-4080 Getting Started Manual

Application
Development
Environment (ADE)
LabVIEW or
LabWindows/CVI
ANSI C or Visual Basic

Troubleshooting

If an issue persists after you complete a troubleshooting procedure, contact NI technical
support or visit ni.com/support.
What Should I Do if the NI 4080/4081/4082 Doesn't
Appear in MAX?
1. In the MAX configuration tree, expand Devices and Interfaces.
2. Expand the Chassis tree to see the list of installed hardware, and press <F5> to refresh
the list.
3. If the module is still not listed, power off the system, ensure that all hardware is correctly
installed, and restart the system.
4. Navigate to the Device Manager.
Operating System
Windows 10/8.1
Windows 7
5. If you are using a PXI or PXI Express controller, verify that a National Instruments
entry appears in the System Devices list. Reinstall NI-DMM and the module if error
conditions appear in the list. If you are using an MXI controller, right-click PCI-to-PCI
Bridge, and select Properties from the shortcut menu to verify that the bridge is enabled.
14 | ni.com | NI PXIe-4080/4081/4082 Getting Started Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Table 2. Locating NI-DMM Examples
Locate examples with the NI Example Finder. Within LabVIEW
or LabWindows/CVI, select Help»Find Examples, and navigate
to Hardware Input and Output»Modular Instruments»NI-
DMM (Digital Multimeters).
Locate examples in the
directory, where
<NIDocDir>
• Windows 8/7/Vista—
Documents\National Instruments
• Windows XP—
Documents and Settings\All Users
\Shared Documents\National Instruments
Description
Right-click the Start button, and select Device Manager.
Select Start»Control Panel»Device Manager.
Location
<NIDocDir>\NI–DMM\examples
is one of the following directories:
Users\Public\Public