Toro 132-5570 Installation Instructions page 3

9. If no power terminals on the existing fuse block are
available, install an additional fuse block (Toro part
number 92-2641) and the 10-amp fuse
2
1. Fuse block
10. Plug in an available power terminal from the fuse block.
11. Connect the black wire with a ring terminal to the
ground-terminal block
1. Ring terminal on the terminal block
12. If not done already, install the 10-amp fuse to the fuse
block.
13. Close the hood.
14. Install the negative battery terminal to the battery.
(Figure
1
G017086
Figure 6
2. Fuse (10 amp)
(Figure 7).
1
Figure 7
6).
G017087
3