Advertisement
You can operate other manufacturers'
equipment using
this Projection Display's remote control,
Procedure
1. Connect
the e×ternal
equipment
to the
Projection
Display
and Power Off the e×ternal
equipment,
2, Press POWER
and OK simultaneously
for
more than
3 seconds,
• Release
the buttons
when the equipment
selection
buttons
start flashing.
3. Select
the equipment
with the equipment
selection
button
(VCR, DBS/CBL,
DVD).
• The selected
button
remains
lit (other buttons
are not lit).
4. Press the NUMBER
keys to input the
equipment's
4-digit
remote control
code,
(p. 58-60)
5, Press POWER
to operate
the equipment
with
the remote
control.
(p. 57)
• The external
equipment
turns
On.
[] If the equipment
does
not operate
with the
remote
control
• When
your equipment
has a single
code
Input the remote
control
code again
• When
your
equipment
has multiple
codes
Change
the code with step 4 and test again
[] Return to the TV mode
Press TV.
• Registration
will fail if the wrong
code
is input or it takes more
than
30 seconds
to register.
This procedure searches all codes and is called the
"sequence method."
Proce([giFe
1. After step 3, press
I_ and POWER
to change
the code
and test.
• Operate
the equipment
with the remote
control.
(p. 57)
• Repeat
until the code is found.
• It may take many attempts
before the correct
code is
found.
2 When
the correct
code
is found,
press
OK.
56
Advertisement
