Advertisement
Always
be sure to follow the procedure
given below to
turn the Projection
Display
power ON and OFF.
• The lamp cooling fan will continue to operate for
approximately 3 minutes after the power is turned off. During
this time, the POWER indicator will blink Red.
Do not disconnect
the power cord from the outlet
and do not open the circuit
breaker (unless
necessary)
while the cooling
fan is still operating.
Do
not disconnect
the power cord from the power outlet
while the power indicator blinks Red.
POWER
button
POWER
indicator
The Power Indicator
LED
ACTION
Off
Power-
OFF
Red (blinking)
Power - OFF (Now
cooling)
Green
Power-
ON
Green
(blinking)
Power-
ON (Preparing
to light lamp)
• If the POWER
button
is accidentally
turned
off during
use,
after power
is turned
back on, it may take a short
period
before
the lamp automatically
comes
on.
• This unit consumes
approx.
0.4 W in OFF condition
when
plugged
into an AC outlet.
Press
POWER
on Projection
Display
or Remote
Control
to turn power on.
• The Power Indicator blinks Green for about 10 seconds and
then turns solid Green.
• Picture display may be delayed when the unit has not been
used for a long time or ambient temperature
is low.
• The fan rotating sound may be increased in high temperature
condition.
Press
POWER
on Projection
Display
or Remote
Control
to turn power off.
• Power shuts off after a Black Screen is displayed for about
3 minutes. If the POWER button is pressed during the Black
Screen display, Power is turned back on.
• The Power Indicator blinks Red for about 3 minutes and then
LED turns off.
Auto shut off
• If "No signal
shut-off"
has been selected
"Set", the TV will
automatically
turn off if NO SIGNAL
is present
for more
than 10 minutes.
(p. 54-55)
• If "No action
shut-off"
has been selected
"Set", the TV will
automatically
turn off if no key has been pressed
for more
than 3 hours.
(p. 54-55)
24
Advertisement
