Advertisement
6. Press
A T to select "ANT
in".
7. Press
4 I_ to select
"Antenna"
or "Cable".
8. Press
A T to select
"Auto".
9. Press OK to display
the Auto
program
menu.
Use this procedure when changing setting
of
receiving
channels or changing the channel display.
Also, use to add or delete channels
from channel
list
manually.
Procedure
1. Press MENU to display
the Main Menu
screen.
2. Press
A T to select
"Setup"
icon.
3. Press OK to display
the Setup
menu.
10. Press
A T to select
"All
channels",
"Analog
only",
or "Digital
only'.
11. Press OK to start
scan.
4. Press
A T to select
"Program
channel'.
5. Press OK to display
the Program
channel
menu.
• If Lock (p. 41) has been set, you must enter your
password
to display
the Program
channel
menu.
12.After
Auto program
is complete,
the unit will
return
to Manual
program
mode.
To place
the channels
that were
located
by auto scan
in memory,
move
the cursor
to "Apply"
and
press
OK. (p. 27-28)
If OK is not pressed
after selecting
APPLY,
the channels
will
not be memorized.
Program channel
6. Press
A T to select "Manual".
7. Press
OK to enter
the Manual program
screen.
• Some
channels
with very weak
signals
may be locked
into
memory.
If desired,
these
channels
can be deleted
manually
using the "Manual
program
setting".
(p. 27-28)
• "Auto program"
must be done when you select
the input
signal
for the first time or whenever
you change
the antenna
configuration.
27
Advertisement
