Download Print this page

Sealey ELECTROSTART E/START1600.V2 Instructions page 2

Batteryless power start 1600a 12v

Advertisement

2. INTRODUCTION
Vehicle jump starting made easy with innovative patented technology. Unlike traditional boosters, it has no internal batteries, as it uses
Ultracapacitors to maximise the discharged battery's voltage. Simply connect to the vehicle's battery, even if discharged, and the unit will draw
enough power to energise itself in a matter of minutes. Power can then be pushed safely back through the starting system to jump start the
vehicle. If the vehicle's battery is faulty or holding less than 5 volts, the ElectroStart range can be pre-charged via another vehicle's battery, a Micro
USB charging cable (supplied with Model No. E/START800) or the 12V accessory lead (excludes Model No. E/START1224). The digital display
indicates battery voltage, capacitor charge and faults. Safely store the unit without the need for battery maintenance, and no delay waiting for a
battery to charge, the device is ready for use within minutes. Compact and lightweight for easier handling and storage, yet still delivers the same
result as heavy, bulky, lead acid battery equivalents. Ideal for both professional mechanics and DIY users.
3. SPECIFICATION
Model No: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E/START1600.V2
Output: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12V
Output start Peak(EN): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1600A(800A)
Maximum Starting Capacity: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Petrol: 6ltr, Diesel: 4ltr
Clamp & Cable Length: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .375mm
Size (W x D x H):. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190 x 60 x 235mm
4. CONTROL PANEL
fig
:
5. OPERATION
5.1.
DUTY CYCLE
After 5 starts let the unit rest for 15 minutes.
5.2.
PREPARATION
Turn off headlights, air conditioning, heated screens, audio etc.
5.2.
BUZZER
5.2.1
Intermittent buzzing indicates the E/START is ready to start vehicles.
5.2.2.
Continuous buzzing means there is an error.
5.3.
STANDARD MODE
In most situations a weak battery on the vehicle can fully recharge the E/START.
5.3.1.
Connect clamps to the battery terminals, E/START will turn on automatically and the display will show the voltage of the vehicle's
battery, see fig.1.
© Jack Sealey Limited
© Jack Sealey Limited
Red backlight
Red backlight
Red backlight
Original Language Version
Original Language Version
E/START1600.V2
E/START1600.V2
Issue: 1 - 12/10/17
Issue: 1 - 12/10/17

Advertisement

loading