Yamaha BD-940 Service Manual page 59

⑤ Enter the 4-digit number using 0-9.
Enter 4-digit password
⑥ Press ENTER to start checking data in the USB
memory device.
Insert USB memory device containing
the software update file.
OK
⑦ During the data checking, "Checking" blinks.
Now checking the data in USB memory device.
Checking
– The current version of this unit software and the
version of the update file on the USB memory
device are displayed. To update this Player
software with update file, select "Yes", and press
ENTER.
Software update file is detected in the USB memory
device. Start update?
Current Ver. :
Update Ver. :
Yes
– If the USB memory device is not properly installed
or the correct update file cannot be found on
the USB memory device, an error message is
displayed.
Check the file on the USB memory device, and
then reinsert the USB memory device correctly.
Software update file is not detected in the USB memory device.
Confirm that you have transferred the
file to the USB memory device and retry software update.
Confirm that you have inserted the USB memory device
into the correct terminal.
OK
There is more than one software file
in the USB memory device.
Confirm that only the software update file is
in the USB memory device.
OK
**1234567
**1234567
No
⑧ Press ENTER to start updating.
– The screen becomes dark for a while until the
update screen can be displayed. Please wait for
the update screen to appear. Do not unplug the
power cable.
The picture will temporarily go dark until
the software update display appears.
Wait several minutes and do not unplug the AC cord.
OK
Now updating
Do not unplug AC cord.
*
Update Version **1234567-2
⑨ When the software is successfully updated, a screen
is displayed indicating that the update process is
completed.
– If the update has failed, check the file in the USB
device and try Software Update again.
⑩ Press to turn off the Player.
⑪ Remove the USB memory device.
Hint
– You can clear the 4-digit number by pressing
CLEAR.
– You can use ENTER on the lower right of the
Number buttons instead of ENTER in the Cursor
buttons.
– You can also update the software by inserting a
CD-ROM with the update file.
BD-940
30%
59