Yamaha BD-940 Service Manual page 58

BD-940
● Communication Setup
The operation procedure for inputting
characters manually
Note
Numeric characters such as IP address can be
entered on the input screen either by selecting each
of the characters in the "Numeric" mode or using the
Number buttons on the remote control.
IP Address 123
Netmask
Gateway
1 Press ENTER at the boxes in which
characters are to be entered, and the input
screen will appear.
Numeric
Edit
1 2 3 4 5 6 7 8 9 0
Selected by pressing
2 Press / to select the desired input mode.
• When inputting the address of the proxy server;
"1ABC" (Alphabet/numeric character) / "Sign" /
"Edit"
• When inputting other values (IP address, etc.);
"Numeric" / "Edit"
3 Press / to select a number/character,
then press ENTER.
4 Repeat step 3 to display all of the desired
characters/numbers in the input field.
Example: The screen for inputting numeric
characters
123
Numeric
Edit
1 2 3 4 5 6 7 8 9 0
Note
Press RETURN (Del.Char.) to delete a number/
character you have input.
To change a number/character you have input, press
B (Left) or C (Right) to select the number/character
you want to change, and press RETURN (Del.Char.).
Then, press /
you want to input, and press ENTER.
58
/
/
Selected by pressing
to select a new number/character
5 Press D (Complete) to fix the numbers which
have been input.
IP Address
123
Netmask
Gateway
6 Repeat step 1 to 5 to finish inputting all the
required characters.
● Software Update
This function allows software updates by inserting a USB
memory device with the update file into the USB BD
STORAGE/SERVICE terminal on this Player.
Some of the newly released BD video discs cannot be
played back unless you update this Player software to
the latest version. We recommend updating the software
of this unit with "Software Update" so that this Player is
operated based on the latest software.
The USB memory device must be clear of all files except
software update data to allow new software uploading.
When a software update is performed, the software
update data must be written onto the USB memory device
in advance using a PC. When software update data is
released, copy the data onto a USB memory device after
downloading it to a PC. Delete unneeded software update
data using a PC after the software update process is
completed.
① Insert the USB memory device with the update file into
the USB BD STORAGE/SERVICE terminal on rear of
this Player.
② Press SETUP to display the Setup Menu screen.
③ Press / / / to select "Settings", then press
ENTER.
④ Press / to select "Software Update", then
ENTER.
– If you have not yet set the password, go to step 6.