Table of Contents
Advertisement
BD-940
5. Removal of BD Mechanism Unit
a.
Remove 4 screws ( ⑪ ). (Fig. 3)
b. Unlock and remove CN3001. (Fig. 3)
c.
Unlock and remove SC3002, and ground the terminal
face of the flexible flat cable with a clip or the like.
(Fig. 3)
d. Remove the BD mechanism unit. (Fig. 3)
13
SC3002
23 mm
(15/16")
Use a clip or other item to ground
the unit.
•
How to manually eject the disc tray
a.
Remove the top cover and front panel unit. (Fig. 1)
b. Press the manual eject lever with screwdriver until the disc tray is ejected. (Fig. 4)
c.
Gently pull the disc tray out.
Screwdriver
Bottom side
20
Terminal side
Clip
CN3001
Fig. 3
BD mechanism unit
Manual eject lever
Fig. 4
6. Removal of BD Module P.C.B.
a.
Remove 3 screws ( ⑫ ). (Fig. 3)
b. Remove 2 screws ( ⑬ ). (Fig. 3)
c.
Remove SC5601. (Fig. 3)
d. Remove the BD Module P.C.B.. (Fig. 3)
11
BD mechanism unit
SC3002
12
Disc tray
11
Rear panel unit
13
SC5601
BD Module P.C.B.
12
Advertisement
Table of Contents
