Replacing The I/O Board; Procedure; Post-Requisites - Dell Inspiron 15 5000 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.

Procedure

1. Using the alignment posts, place the I/O board on the palm rest and keyboard assembly.
2. Align the screw holes on the I/O board with the screw holes on the palm rest and keyboard assembly.
3. Replace the two screws (M2x3) that secure the I/O board to the palm rest and keyboard assembly.
4. Connect the power and volume-buttons board cable and the coin-cell battery cable to the I/O board.
5. Slide the I/O-board cable into the connector on the I/O board and close the latch to secure the cable.
6. Adhere the tape that secures the I/O-board cable to the I/O board.

Post-requisites

1. Replace the wireless card.
2. Replace the battery.
3. Replace the base cover.

Replacing the I/O board

computer. After working inside your computer, follow the instructions in
30
After
Replacing the I/O board 47