Removing The Status-Light Board; Prerequisites; Procedure - Dell Inspiron 15 5000 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.

Prerequisites

1. Remove the base cover.
2. Remove the battery.

Procedure

1. Open the latch and disconnect the status-light board cable from the system board.
2. Peel off the foam that secures the status-light board to the palm rest and keyboard assembly.
3. Lift the status-light board along with its cable off the palm rest and keyboard assembly.
Figure 15. Removing the status-light board
1. latch
3. palm rest and keyboard assembly
5. foam
28

Removing the status-light board

Removing the status-light board
computer. After working inside your computer, follow the instructions in
2. status-light board cable
4. status-light board
15
After