Removing The Touchpad; Prerequisites; Procedure - Dell Inspiron 15 5000 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.

Prerequisites

1. Remove the base cover.
2. Remove the battery.
3. Remove the status-light board.

Procedure

1. Open the latch, and then disconnect the touchpad cable from the system board.
2. Peel off the touchpad cable from the touchpad.
3. Peel off the tape that secures the touchpad assembly to the palm rest and keyboard assembly.
Figure 16. Disconnecting the touchpad cable
1. latches
3. palm rest and keyboard assembly
4. Remove the four screws (M2x2) that secure the touchpad to the palm rest and keyboard assembly.
5. Lift the touchpad at an angle off the palm rest and keyboard assembly.
30

Removing the touchpad

Removing the touchpad
computer. After working inside your computer, follow the instructions in
2. touchpad cable
4. tape
17
After