Related Manuals for Ultimate Ears WONDERBOOM
Summary of Contents for Ultimate Ears WONDERBOOM
-
Page 1: User Manual
USER MANUAL CHARGE To charge your WONDERBOOM, plug the included USB cable into the micro-USB port located inside the weather door. DOUBLE-UP... - Page 2 MULTI-HOST WONDERBOOM can simultaneously connect with up to two Bluetooth mobile devices. Simply pair and connect each mobile device to WONDERBOOM, then you can take turns playing music from each device.
- Page 3 You can control the music directly from your WONDERBOOM without picking up your phone. To pause the stream, simply press the ULTIMATE EARS button located on the top of the speaker. Press it again to resume playing. Double press the button will skip to the next track.
- Page 4 PLAY MUSIC Once WONDERBOOM is on and connected to your mobile device, just hit play to begin streaming your music. You can control the volume from your mobile device, or directly from your WONDERBOOM by pressing the “+” or “-” button.
- Page 5 POWER To get started with your WONDERBOOM, press the power button located on the top of your speaker. When powered on, WONDERBOOM automatically reconnects to the last mobile device it was connected to. WONDERBOOM will automatically turn itself off after 15 minutes of inactivity to save battery life.
Need help?
Do you have a question about the WONDERBOOM and is the answer not in the manual?
Questions and answers
How do I connect an older ultimate ears to a bluetooth transmitter connected to an older stereo amplifier?
To connect an Ultimate Ears WONDERBOOM to a Bluetooth transmitter connected to an older stereo amplifier, follow these steps:
1. Turn on the WONDERBOOM speaker.
2. Put the speaker into pairing mode: If it's the first device being paired, it enters pairing mode automatically. Otherwise, hold down the Bluetooth button until you hear a tone and the Bluetooth light blinks rapidly.
3. Set the Bluetooth transmitter to pairing mode. Refer to the transmitter’s instructions to do this.
4. Wait for the transmitter to detect and pair with the WONDERBOOM speaker. Once paired, audio from the amplifier will transmit to the speaker via Bluetooth.
Make sure the transmitter is compatible with Bluetooth audio output and supports the same Bluetooth version or profiles as the speaker.
This answer is automatically generated