Advertisement
Quick Links
SB
Service Bulletin SB-04 covers the replacement of
Brake Cable on the Clicgear Cart, Model 3.0
2
Disassemble the Cable Nut Assembly and remove all
the components from the Cable.
4
Separate the broken Umbrella Brake Mount, Brake
Cable Sheath, Cable and Brake Lever from the cart,
remove the Cable from the Brake Lever.
BRAKE CABLE
REPLACEMENT
1
Remove the 10mm Nut from the Cable Nut Assembly.
This should loosen the cable and the Brake Hammer
should swing upwards when free.
3
Unscrew the Lock Screws that secure the Cable to
the Tube.
5
For Model 2.0
Small Cable Barrel
Cable length:
71" (180 cm)
Brake Cable
Sheath length:
63" (160 cm)
Prepare New Brake Cable Sheath and New Cable for
replacement, they are different from those in Model 2.0
PAGE: 1 OF 3
BULLETIN
04
For Model 3.0
Large Cable Barrel
Cable length:
79" (200 cm)
Brake Cable
Sheath length:
71" (180 cm)
MODEL
3
0
.
10MM
SOCKET
DRIVER
CROSS
SCREW
DRIVER
Advertisement
Related Manuals for Clicgear 3.0
Summary of Contents for Clicgear 3.0
- Page 1 DRIVER Service Bulletin SB-04 covers the replacement of Remove the 10mm Nut from the Cable Nut Assembly. Brake Cable on the Clicgear Cart, Model 3.0 This should loosen the cable and the Brake Hammer should swing upwards when free. CROSS...
- Page 2 BULLETIN MODEL BRAKE CABLE REPLACEMENT Insert the New Brake Cable Sheath to the Cart. The New Brake Cable Sheath should pass through the bottom hole of Center Lower Hinge. CROSS SCREW DRIVER The lower metal end cap of New Brake Cable Sheath Screw the Lock Screw to secure the New Brake Cable should be inserted into the Cable Adjust Nut and Bolt.
- Page 3 BULLETIN MODEL BRAKE CABLE REPLACEMENT CROSS SCREW DRIVER The Brake Washer will be placed between the metal Assemble the Brake Lever on New Umbrella Brake end cap of New Brake Cable Sheath and the New Mount, push the end of the New Brake Cable Sheath and Brake Washer into it.
Need help?
Do you have a question about the 3.0 and is the answer not in the manual?
Questions and answers