Table of Contents
Advertisement
Chapter 5: Web-Based Management
System Event Log-SMTP Configuration
Simple Mail Transfer Protocol (SMTP) is the standard for email transmissions across
the network. You can configure the SMTP server IP, mail subject, sender, mail account,
password, and the recipient email addresses, which the e-mail alert will send to.
There are also five types of event-Device Cold Start, Device Warm Start,
Authentication Failure, X-Ring Topology Change, and Port Event-available to be
issued as the e-mail alert. Besides, this function provides the authentication
mechanism including an authentication step through which the client effectively logs
in to the SMTP server during the process of sending e-mail alert.
Figure 5-12: SMTP Configuration interface
This page includes the following fields:
Object
Email Alert:
SMTP Server IP:
Sender:
56
Description
With this function being enabled, the user is allowed to configure the
detail settings for sending the e-mail alert to the SMTP server when
the events occur.
Assign the mail server IP address (when Email Alert is enabled, this
function will then be available).
Type in an alias of the switch in complete email address format, e.g.,
to identify where the e-mail alert comes from.
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
Advertisement
Table of Contents
