GE -DSH-73 User Manual page 137

This page includes the following fields:
Object
Maximum Power Available
Actual Power Consumption This column shows the real-time total power consumption.
System Power Limit
Main Supply Voltage
Firmware Version
Port Knockoff Disabled
AC Disconnect
Capacitive Detection
Start
Port
Enable State
Power Limit From
Classification
Legacy
Priority
Port Limit (<15400) mW
Mode
Current (mA)
Voltage (V)
Power (mW)
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
Description
Displays the maximum power supply in Watt.
User can modify the value to this column field to limit the total output
power for the system.
This column shows the output voltage of the system for PoE ports.
This column shows the PoE chip's firmware version.
Power Management state where one or more PDs have been powered
down so that a higher priority PD may be powered up and yet not
exceed the maximum total power available for PDs.
Tick this checkbox to monitor the AC impedance on the port terminals
and removes power when the impedance rises above a certain value, for
a certain period (for details, see the IEEE 802.3af specification).
If the port and capacitive detection are enabled, the capacitances state
reads in the voltage result from the constant current. This is then
subtracted from the pre-capacitance voltage to get a charge rate. If this
charge rate is within the window of the PD signatures, the device is
considered to be discovered.
Showing with a tick symbol, the system initializes and resets
successfully.
The index of PoE ports.
Check it to enable the PoE function to the port.
Check it to decide the power limit method.
When this check box is ticked, the system will limit the power supply to
the powered device in accordance with the related class.
Check it to support the legacy power devices.
Pull down the selection menu item to choose the priority of power
supplying.
Critical
High
Low
High priority is "Critical".
User can key in the power limit value which is under 15.4 Watts.
Displays the operating mode of the port.
Displays the operating current of the port.
Displays the operating voltage of the port.
Displays the power consumption of the port.
Chapter 5: Web-Based Management
133