Chapter 2: Installation
DIN-Rail Mounting
The DIN-Rail is screwed on the Industrial Switch when out of factory. If the DIN-Rail is
not screwed on the Industrial Switch, please see the following pictures to screw the
DIN-Rail on the Switch. Follow the steps below to hang the Industrial Switch.
Figure
2-10:
Rear Panel - DIN-Rail Kit
1. Insert the top of DIN-Rail into the track.
Figure
2-11:
Rear Panel - DIN-Rail Kit
24
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual