Advertisement
This unit is a PRESET Clock/Radio; the clock is already preset at the factory. You just need to set the time zone for your
location.
1. Depending on your location and whether or not Daylight Saving Time (DST) is in effect, set the DST Switch located on
the back of the unit to +1 to add an hour or to -1 subtract an hour.
2. Press and hold the Time Zone Button located on the back of the unit the Time Zone Indicator at the lower part of the
display flashes the current time zone. Press the << or >> Button to select your time zone.
3. Press Time Zone Button again (or no button within 10 seconds) to exit the setting mode.
4. If the time showing is not correct, please see Setting Time and Calendar to set the clock.
Setting Time and Calendar
1. Press and hold the Time Button located on the back of the unit until the time blinks on the display.
Press the << or >> Button to adjust to correct time (holding the button for few seconds to advance or reverse rapidly).
2. Remember to set the correct AM or PM time. A PM Indicator appears to the right side of the time digits; there is
no AM indicator.
3. Press the Time Button again. The year will blink. Press the << or >> Button until the current year is displayed.
4. Press the Time Button again to adjust month and date. Press the << or >> Button until the current month/date is
displayed. Hold the button for a few seconds to advance or reverse rapidly.
5. Press the Time Button again (or no button within 10 seconds) to exit the setting mode.
Using the Alarms
Setting the Alarms
1. Press and hold the
Button until the display flashes. Press the << or >> Button to set the alarm time. Remember to
set the correct AM or PM time. Press the Alarm 1 Button to confirm alarm time.
2. Press the MODE Button to select iPod, AM radio, FM radio or Nature sounds to wake to (if AUX is selected, you will
wake to buzzer). Set the volume to the level you wish to wake to.
Press the
Button to exit alarm time setting.
3. Once Nature sounds is selected as the wake to source, the display will show "Sd1" (sound 1). Press the << or >> Button
to select the Nature sound you wish to wake to.
4. To set Alarm 2 just repeat step 1 and 3 about but using
5. If you select iPod as the alarm source but no iPod is docked/detected, the Ti72 will default to the buzzer alarm.
Note: make sure you have an hour of audio on your iPod.
Review, Arming and Disarming Alarm (Turn Alarm Function On and Off)
1. Once alarm is set, it is armed and the lower part of the display will show the alarm time. If both alarms are armed, the
earliest alarm time will show.
2. To arm/disarm an alarm, just press the related alarm button to toggle it on or off. If the alarm is armed, the related alarm
icon will light up.
Resetting the Alarm to Come on the Next Day
1. When the alarm is sounding, press the
same time.
Using the Ti72
Button.
Button to stop the alarm and reset it to come on the following day at the
4
Advertisement
