Pri Networking Channel Limitation; Description; Feature Cross Reference - NEC Aspire Series Networking Manual

Programming

10-32 : PRI Networking Channel Limitation

10-32 : PRI Networking Channel Limitation
Level:
IN

Description

Input Data
Item
No.
01 Maximum Channels
Conditions

Feature Cross Reference

128 ◆
Aspire S
• Not Available.
Use Program 10-32 : PRI Networking Channel Limitation to assign the number of B-channels
to be used for each ISDN PCB. This allows for fractional PRIs when used with multiple site net-
working. If this program is limited to less than "23" on one side of the network, then it also limits
both inbound and outbound network calls. For example, when you select 10 channels then only
channels 1 to 10 will be available. If a call is attempted on channels 11 to 30 the caller will receive
busy tone. This also applies on the other side of the network as well.
The setting is for each slot within the Aspire system; ensure that you select the correct slot before
making any changes.
This program will not affect a PRI card set as Trunk or Station mode.
Slot Number
Item
None
Networking
• Available with software 2.09+.
Input Data
1 - 23
Aspire M/L/XL
1 - 16
Related
Default
Program
Slots 1-16 = 23
Networking