Feature Cross Reference - NEC Aspire Series Networking Manual

Programming
10-12 : NTCPU Network Setup
06 NAPT 0=Disable, 1=Enable
Router
Setup
Enable or
disable the
NAPT
Router
Setup.
With SIP
trunking
behind a
NAPT
router, this
must be
set to
enabled.
07 NAPT 0.0.0.1 - 126.255.255.254
Router IP 128.0.0.1 - 191.255.255.254
Address 192.0.0.1 - 223.225.225.254
Set the
NAPT
Router IP
Address.
With SIP
trunking,
the IP
address of
the WAN
side of the
router
must be
entered.
08 ICMP 0=Enable, 1=Disable
Redirect
Conditions

Feature Cross Reference

120 ◆
The system must be reset in order for these changes to take affect.
● VoIP
0
0.0.0.0
0
Networking