Requirements
The prerequisites for "Measuring in JOG" are detailed in Part 2 "Function description".
The following checklist is useful for determining whether the preconditions are fulfilled:
• Machine
• PLC
Measuring cycles
Programming Manual, Release 04/2006, 6FC5398-4BP10-0BA0
– All machine axes are designed in accordance with DIN 66217.
– All 3 geometry axes are present according to MD 20050
AXCONF_GEOAX_ASSIGN_TAB.
– Reference point approach was completed in all the required machine axes.
– A touch-trigger workpiece probe (3D) is provided for acquiring workpiece dimensions,
and a touch-trigger tool probe for acquiring tool dimensions.
810D, 840D, 840Di with HMI Advanced, with option required:
"Inter-modal actions" (ASUP's and synchronized actions in all modes)
Measuring in JOG
4.1 Overview
4-3