Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Onlogic Karbon 700 Series
Summary of Contents for Onlogic Karbon 700 Series
- Page 1 Karbon 700 Product Manual ...
- Page 2 Revision History Revision History Date First release of Karbon 700 manual 08/22/2019 ...
-
Page 3: Table Of Contents
1 - System Overview 1.1 - Accessories 1.2 - Product Specifications 1.3 - Exterior Features and Dimensions 1.3.1 - Front I/O 1.3.2 - Back I/O 1.3.3 - Karbon 700 Dimensions (K700-SE) 1.3.4 - Karbon 700 Dimensions with PCIe Expansion (K700-X2) 1.4 - Motherboard Overview 1.4.1 - System Block Diagram 1.4.2 - Motherboard Features... - Page 4 5.1 - Wake-Up Events 5.2 - Protection Circuitry 6 - Test Reports 6.1 - ISO 7637-2 and ISO 16750-2 Summary 6.1.1 - Electrical Supply/Load Voltage Drop Data 6.1.2 - Paragraph 4.11 Voltage Withstand Test Results 23 6.2 - Electrical Supply/Load Disturbance Data 6.2.1 - Paragraph 4.7 Reverse Voltage Test Results 6.2.2 - Paragraph 4.9 Open Circuit Test Results 6.2.3 - Paragraph 4.10 Open Circuit Test Results...
-
Page 5: System Overview
10-pin DIO Terminal Block Connector (Dinkle PN: EC350V-10P) ● 5-pin Terminal Block to 6-pin Molex Adapter (OnLogic PN: CBP133) ● SATA Power and Data Cables If Not Installed (OnLogic PN: CBD123) ● If you purchased additional items such as mounting brackets, power supplies or antennas, they will be located in the system box or within the outer shipping carton. -
Page 6: Product Specifications
1.2 - Product Specifications Karbon 700 Series Intel 8th Gen Coffee Lake & 9th Gen Coffee Lake Refresh Processor LGA1151 Celeron, Pentium, Core & Xeon E up to 80W Memory 2 DDR4-2666 SO-DIMM up to 64GB total (non-ECC or ECC) - Page 7 Wall/surface (bottom) Mounting Wall/surface with Vibration Isolation (bottom) Operating Temperature: -40°C ~ 70°C (35W TDP CPU) -40°C ~ 50°C (60W TDP CPU) Temperature -40°C ~ 40°C (80W TDP CPU) Storage Temperature: -40°C ~ 85°C Operating Humidity: 10~95% relative Humidity Storage Humidity: 0~95% relative Shock: Tested according to IEC 60068-2-27 and MIL-STD-810G Shock &...
-
Page 8: Exterior Features And Dimensions
1.3 - Exterior Features and Dimensions 1.3.1 - Front I/O 1.3.2 - Back I/O ... -
Page 9: Karbon 700 Dimensions (K700-Se)
1.3.3 - Karbon 700 Dimensions (K700-SE) 1.3.4 - Karbon 700 Dimensions with PCIe Expansion (K700-X2) ... -
Page 10: Motherboard Overview
1.4 - Motherboard Overview 1.4.1 - System Block Diagram ... -
Page 11: Motherboard Features
1.4.2 - Motherboard Features Item Function Description Power button SIM card holder Remote switch 8-bit isolated DIO (10 pins, 4-in, 4-out) 3.5 mm combo audio connector COM RS-232/422/485 ports USB 3.1 Gen 1 Type A 3 RJ45 GbE LAN connector (2 PoE optional with A25 module) USB 3.1 Gen 1 Type A ... - Page 12 Full-size DisplayPort with CEC support 3-pin CAN bus 5-pin power input with ignition sense External fan connector ModBay™ connector 1 ModBay™ connector 2 PCIe riser slot (x16 lanes) SATA 1 SATA 2 M.2 2230/60/80 M-key M.2 2230 E-key mPCIe/mSATA mPCIe M.2 2280 M-key RTC backup battery Onboard PoE module header...
-
Page 13: I/O Definitions
2 - I/O Definitions 2.1 - Serial Ports The serial port mode and voltage between Off/5V/12V on Pin 9 on Karbon 700 can be selected in the BIOS configuration. The serial ports support RS-232, RS-422, and RS-485 configurations. Refer to the BIOS manual for configuration instructions. -
Page 14: Dio
2.2 - DIO The Karbon 700 Digital Input Output (DIO) or General Purpose Input Output (GPIO) terminals are optically isolated. This means that the terminal is separated from other motherboard features for protection. The DIO terminal requires external power from a 5~48VDC source through Pin 10 with GND to Pin 1 in order to function. -
Page 15: Dio Connection Diagram
2.2.1 - DIO Connection Diagram The Isolated Power Supply (ISO PSU) can be a voltage source from 5V-48V to interface with external digital IO. The max power draw from the supply should not exceed 0.6A under normal operating conditions. Individual DOut pins will be damaged by a load in excess of 150mA. The ISO PSU can only ... -
Page 16: Leds
2.4 - LEDs Blink Pulse Internal storage drive activity Device is Power Device is on Device is off asleep Ignition input Automotiv Ignition input to device is e Ignition to device is off MCU is not MCU is not Firmware MCU is Watchdog functioning... -
Page 17: Automotive Ignition Power Sensing (Ign)
The K700 5-pin power input terminal offers automotive ignition sensing. The ignition sensing timing for power on and off delays can be modified through OnLogic’s microcontroller (MCU) using serial commands. These commands allow setting the delay on startup after ignition is detected, the delay until soft and hard shutdown when ignition is lost, and enabling/disabling ignition sensing. -
Page 18: Can Bus Connection Diagram
2.6.1 - CAN Bus Connection Diagram 2.7 - LAN The K700 provides three GbE LAN ports. Two of these LAN ports have an optional PoE function using an optional onboard module. When the PoE module is installed, the two PoE ports will provide up to 32W of combined power. -
Page 19: Mounting Instructions
3 - Mounting Instructions 3.1 - Wall Mount Step 1: Attach wall mounting brackets to the chassis using: Screw type: M4X0.7 T10 TORX 120 Length: 10 mm Step 2: M ark and prepare holes on the surface for mounting Step 3: ... -
Page 20: Wall Mount With Vibration Isolation
3.2 - Wall Mount with Vibration Isolation Step 1: A ttach wall mounting brackets to the chassis using: Screw type: M4X0.7 T10 TORX 120 Length: 10 mm Step 2: M ark and prepare holes on the surface for mounting Step 3: ... -
Page 21: Microcontroller
4 - Microcontroller 4.1 - Overview The microcontroller on Karbon 700 controls several systems, including: Automotive ignition power sensing ● CAN bus ● ● Status LEDs ● Power management and wake-up ● DisplayPort CEC and persistent EDID ● Input voltage monitoring ●... -
Page 22: Protection Circuitry
6 - Test Reports 6.1 - ISO 7637-2 and ISO 16750-2 Summary The OnLogic, Inc. Model Karbon 700 PC meets ISO 7637-2 and ISO 16750-2 requirements for conducted transients and supply/load disturbance. Sections IX through XI reference measurement procedures of VIII-1 through -7 in accordance with performance criteria described in Section V for type acceptance and per the manufacturer's test plan. -
Page 23: Paragraph 4.11 Voltage Withstand Test Results
ISO 16750-2 Application Voltage Duration Cycle/PRT Spec. Result Paragraph Port Power Entry 60 m Power Entry 120 s 50Hz - 25 kHz 9V to 0V 1080 ms Power Entry 0V to 9V 1080 ms 4.6.1 9V to 9V Power Entry 100 ms @ 10 s 9V to 0V 4.6.2... -
Page 24: Paragraph 4.9 Open Circuit Test Results
6.2.2 - Paragraph 4.9 Open Circuit Test Results @ 0 VDC for 10 s. Test Point Notes Current (mA) Main Input Single Lead Class C Main Input Both Leads Class C 6.2.3 - Paragraph 4.10 Open Circuit Test Results @ 32 VDC for 60 s. -
Page 25: Conducted Transient Data
6.3 - Conducted Transient Data The table below describes the results of the transient test. The system does not exhibit susceptibility to conducted transients delivered directly to power lines. “A” result = No effect on EUT. Pulse Voltage V Application Duration Cycle/PRT... -
Page 26: Electrical Fast Transient Immunity Data
6.4.3 - Electrical Fast Transient Immunity Data The system does not exhibit susceptibility to 0.5-kV/1-kV/2-kV electrical fast transients, delivered in 5-kHz bursts to power lines. “A” result = No effect on EUT. The system does not exhibit susceptibility 0.5-kV/1-kV/2-kV electrical fast transients, delivered in 5-kHz bursts to signal lines.
Need help?
Do you have a question about the Karbon 700 Series and is the answer not in the manual?
Questions and answers