Advertisement
4
GFK-2739
Important Product Information for this Release
Release History
Version
IC200BEM003-AA
Compatibility
The PROFIBUS Master module requires the following programming software and CPU versions:
Programmer software
VersaMax CPU version
VersaMax PNS version
Rx3i PNC version
Rx3i CPU version
Restrictions and Open Issues
Subject
RX3i PBS301 returns an error
response to a VersaMax PBM
configured at high baud rate
Firmware Release
1.00
March 2012
Proficy Machine Edition, version 7.0 with SIM7 or later
Requires IC200CPU005 or IC200CPUE05 firmware version 2.36 or later
Requires IC200PNS001/PNS002 firmware version 1.10 or later
Requires IC695PNC001 firmware version 1.10 or later
Requires IC695CPU320, CPU315, CPE305 or CPE310 firmware version
7.13 or later
If an RX3i PBS301 is configured with DPV1 enabled as PROFIBUS slave
attached to a VersaMax PBM, and the baud rate is configured to 1.5M or
greater, the RX3i PBS cannot respond to the DPV1 alarm acknowledge request
quickly enough when it receives these request messages at a high rate.
Date
Comments
Initial release
Description
PROFIBUS Master Module
Advertisement
