MUTOH ValueJet VJ-1324 Maintenance Manual page 150

3.5 Replacement of PF Driving Section Components
5. Remove the screws (4 pieces) retaining ENC holder.
No.
×
1 Tapping screwM3 8 P Tight cup
2 PF Encoder scale
3
ENC holder
6. Remove ENC holder.
7. Remove PF Encoder scale.
No.
PF Encoder scale.
1
3.5.5 Replacing X speed reduction belt 、 Speed reduction Pulley
1
2
3
Name
1
Name
NOTE
When handling PF Encoder scale, be careful with the following:
• Do NOT damage or bend PF Encoder scale or touch its outer circumference.
• Make sure that slit mounting flange has NO remaining double-sided tape.
8. Remove Speed reduction belt from speed reduction pulley.
1
No.
1
Speed reduction pulley
2 X speed reduction belt
9. Replace X Speed reduction belt.
10. Install PF Encoder Scale.
VJ1324E-M-02
2
Name
P.3-68