Removing And Installing Coolant Temperature Sender G62 - Skoda Octavia III 2013 Workshop Manual

Octavia III 2013 ➤ , Octavia III 2014 ➤
1.8/132 kW TSI; 2.0/162 kW TSI engines - Edition 01.2015
– Tighten the screws of the positioning element for engine tem‐
perature control - N493-
– Install coolant pump
– Replenish coolant ⇒ page 182
2.11 Removing and installing coolant temper‐
ature sender - G62-
Removing
• Engine cold
– To release the residual pressure in the cooling system, briefly
open the screw cap -arrow- on the coolant expansion tank,
and seal it until it latches into position.
– Remove air filter housing
– Loosen hose clamp -2-.
– Unscrew the screw -1- and press the left-hand air guide pipe
to the left with light force.
202
Rep. gr.19 - Cooling
⇒ page 190 .
⇒ page 195 .
.
⇒ page 288 .