NEC Express5800 Series Maintenance Manual page 67

Chapter 2 Useful Features
If a network card equipped with four ports is installed in Slot 2, the screen as shown below is displayed.
Option
LAN1 Option ROM Scan
LAN2 Option ROM Scan
Mezzanine
Slot 1 Option ROM Scan
Slot 2 Port 1 Option ROM Scan
Slot 2 Port 2 Option ROM Scan
SAS Option ROM Scan
– I/O Blade
See (1.2.2 (3) (b) I/O Blade Submenu) for parameters.
This item is displayed when N8404-019F Additional HDD Blade is installed.
Parameter
Disabled
[Enabled]
[Disabled]
Enabled
[Disabled]
Enabled
Disabled
[Enabled]
Note For a RAID controller, LAN card (network boot), or Fibre Channel controller, if no hard disk
drive on which an OS is installed is connected, set the option ROM for that PCI slot to
Disabled.
Express5800/B120f Maintenance Guide
Description
Enables or disables the option ROM Scan for on-board LAN 1.
Enables or disables the option ROM Scan for on-board LAN 2.
Enables or disables the option ROM Scan on each Mezzanine
slot.
Available boot protocol is displayed if this item is set to Enabled
and a Mezzanine card which has network boot function is
installed.
Enables or disables the option ROM Scan for SAS DAC.
1. System BIOS
[ ]: Factory setting
67