Chapter 2 Useful Features
14. Select "Start Operation", and press the <Enter> key.
15. The following screen is output, and Reconstruction starts.
156
Important
During Reconstruction, do not shutdown or reboot the server.
Be sure to make backup copy of data and perform Consistency Check
before starting Reconstruction.
You cannot perform Reconstruction on the configuration where several
Virtual Drives are defined in one Drive Group.
Reconstruction can be performed for the degraded or partially degraded
Virtual Drive. However, it is recommended to execute Rebuild to recover
the Virtual Drive, then execute Reconstruction.
Express5800/B120f Maintenance Guide
4. RAID System Configuration