NEC Express5800 Series Maintenance Manual page 198

Chapter 3 Appendix
Error Message
AE84 CPU1_DIMM4 with error is
enabled.
AE85 CPU1_DIMM5 with error is
enabled.
AE86 CPU1_DIMM6 with error is
enabled.
AE8D CPU2_DIMM1 with error is
enabled.
AE8E CPU2_DIMM2 with error is
enabled.
AE8F CPU2_DIMM3 with error is
enabled.
AE90 CPU2_DIMM4 with error is
enabled.
AE91 CPU2_DIMM5 with error is
enabled.
AE92 CPU2_DIMM6 with error is
enabled.
B000 Expansion ROM not initialized There is no free area for expanding
B030 PCI System Error on
Bus/Device/Function
B040 PCI Parity Error on
Bus/Device/Function
B200 Onboard VGA - PCIe Link Failure Connection failure of PCIe bus was
B201 Onboard LAN 1 – PCIe Link
Failure
B202 Onboard LAN 2 - PCIe Link
Failure
B220 Onboard VGA - PCIe Link Width
Error
B221 Onboard LAN 1 – PCIe Link
Width Error
B222 Onboard LAN 2 – PCIe Link
Width Error
B260 Onboard VGA - PCIe Link Speed
Error
B261 Onboard LAN 1 – PCIe Link
Speed Error
198
Cause
An error in CPU1_DIMM4 was
detected, but this DIMM was forcibly
enabled because all memory was
disabled.
An error in CPU1_DIMM5 was
detected, but this DIMM was forcibly
enabled because all memory was
disabled.
An error in CPU1_DIMM6 was
detected, but this DIMM was forcibly
enabled because all memory was
disabled.
An error in CPU2_DIMM1 was
detected, but this DIMM was forcibly
enabled because all memory was
disabled.
An error in CPU2_DIMM2 was
detected, but this DIMM was forcibly
enabled because all memory was
disabled.
An error in CPU2_DIMM3 was
detected, but this DIMM was forcibly
enabled because all memory was
disabled.
An error in CPU2_DIMM4 was
detected, but this DIMM was forcibly
enabled because all memory was
disabled.
An error in CPU2_DIMM5 was
detected, but this DIMM was forcibly
enabled because all memory was
disabled.
An error in CPU2_DIMM6 was
detected, but this DIMM was forcibly
enabled because all memory was
disabled.
option ROM.
PCI SERR was detected.
PCI PERR was detected.
detected on onboard VGA.
Connection failure of PCIe bus was
detected on onboard LAN1
Connection failure of PCIe bus was
detected on onboard LAN2
Link Width error was detected on
onboard VGA.
Link Width error was detected on
onboard LAN1.
Link Width error was detected on
onboard LAN2.
Link Speed error was detected on
onboard VGA.
Link Speed error was detected on
onboard LAN1.
Express5800/B120f Maintenance Guide
1. Error Message of POST and Virtual LCD
Solution
Contact your sales representative.
If the device is not used as a boot device,
disable Option ROM Scan for that device.
Contact your sales representative.