Extended Battery Installation And Replacement - Arris SURFboard SBV3202 User Manual

Note: The SBV302 uses a Lithium-Ion battery pack. Please recycle or dispose of the battery
responsibly and in accordance with local ordinances, see
recycling your ARRIS equipment

Extended battery installation and replacement

This model of the SBV3202 provides continued telephone service during power outages. The
battery backup is not intended to take the place of AC power.
Use this procedure to install or replace the backup battery.
1. Press down and pull back on the latch holding the battery door (on the bottom of the
SBV3202).
2. Pull the door toward you and set the door aside in a safe place.
1 - Latch End
CAUTION
Risk of equipment damage
Improperly inserting the battery may damage the battery connector in the SBV3202.
Carefully follow the instructions in the next step to avoid damage.
3. Hold the battery pack so that the guides on the battery align with the slots on the
SBV3202 and slide the battery into the bay.
PN 365-095-32810 x.2
© 2018 ARRIS Enterprises, LLC. All rights reserved.
Chapter 4: Battery installation and removal
for more information (page 7).
SBV3202 DOCSIS® 3.0 Telephony Modem for Xfinity® Customers User Guide
Caring for the environment by
17