Contractor Certification Requirements; Related Manuals - Veeder-Root TLS-450 Manual

Board and software replacement/upgrade
Hide thumbs Also See for TLS-450:
Table of Contents

Advertisement

Introduction
This manual contains instructions for replacing the following TLS-450 console components:
• CPU board
• RAM board
• Replacing Software/CF card
• Replacing iButton
• Installing software features
• Replacing CF card
• Replacing CF card version 3.X or earlier to latest version
This manual does not provide troubleshooting information.

Contractor Certification Requirements

Veeder-Root requires the following minimum training certifications for contractors who will install and setup the
equipment discussed in this manual:
Installer (Level 1) Certification: Contractors holding valid Installer Certification are approved to perform wiring
and conduit routing; equipment mounting; probe, sensor and carbon canister vapor polisher installation; wireless
equipment installation; tank and line preparation; and line leak detector installation.
ATG Technician (Level 2/3 or 4) Certification: Contractors holding valid ATG Technician Certifications are
approved to perform installation checkout, startup, programming and operations training, system tests,
troubleshooting and servicing for all Veeder-Root Series Tank Monitoring Systems, including Line Leak Detection.
In addition, Contractors with the following sub-certification designations are approved to perform installation
checkout, startup, programming, system tests, troubleshooting, service techniques and operations training on the
designated system.
• Wireless 2
• Tall Tank
VR Vapor Products Certification: Contractors holding a certification with the following designations are
approved to perform installation checkout, startup, programming, system tests, troubleshooting, service techniques
and operations training on the designated system.
• ISD – In Station Diagnostics
• PMC – Pressure Management Control
• CCVP - Veeder-Root Vapor Polisher
• Wireless – ISD/PMC Wireless
• A current Veeder-Root Technician Certification is a prerequisite for the VR Vapor Products course.
Warranty Registrations may only be submitted by selected Distributors.

Related Manuals

577013-879 TLS-450 Site Prep Manual
577013-918 TLS-450 Troubleshooting Guide
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TLS-450 and is the answer not in the manual?

Questions and answers

Table of Contents