Nokia 6310i Service Manual page 193

PAMS Technical Documentation
&KDUJHU IDLOXUH
,VVXH  $SULO 
Phone is off - battery is completely empty
(~3.1 VDC) and no current is drawn from
charger when connected
Yes
VCHAR > 2.1 VDC on L100 towards C107
Yes
D200 UEM is
faulty
Phone is on or off - battery has norminal
voltage 3.6 VDC and no current is drawn from
charger when connected
Yes
VCHAR > 2.1 VDC on L100 towards C107
Yes
Check:
D200, D400
Display information when charger connected:
"Not charging"
Yes
Voltage on R240 towards D200 (UEM)
~0.8 VDC when power is connected. BSI
value must be 39K (BPS-2, BLS-2)
Yes
Voltage (Use Scope) on R220 towards D200
(UEM) ~0.9 VDC at peak. BTEMP value must
be 47K.
Yes
Voltage on R200 towards D200 (UEM) same
as VBAT voltage
Yes
Voltage slowly rises on R200 towards D200
(UEM) when charger is connected
Yes
Check:
PWB
1RNLD &RUSRUDWLRQ
NPL-1
6 - Troubleshooting
Check:
No F100, L100, V101,
C107
Check:
No F100, L100, V101,
C107
Check:
No X101,
R202,R240,C240
Check:
No X102,R202,R220,
C220
Check:
No
R200, D200
Check:
No
D200, PWB
3DJH