NTP-B22 Set Up CTC Computer to Connect to the ONS 15327
Table 2-2
Local Craft Connection Task
DLP-B52 Set Up a Windows PC for Craft
Connection to an ONS 15327 Using
Automatic Host Detection, page 2-15
DLP-B50 Set Up a Windows PC for Craft
Connection to an ONS 15327 on the Same
Subnet Using Static IP Addresses, page 2-11
DLP-B53 Set Up a Solaris Workstation for a
Craft Connection to an ONS 15327, page
2-17
DLP-B51 Set Up a Windows PC for Craft
Connection to an ONS 15327 Using DHCP,
page 2-13
Stop. You have completed this procedure.
Cisco ONS 15327 Procedure Guide, R4.0
2-10
ONS 15327 Craft Connection Options
Chapter 2
Description
Complete this task if:
All nodes that you will access run Software Release
•
3.3 or later.
You will connect to ONS 15327s at different
•
locations and times and do not wish to reconfigure
your PC's IP settings each time.
You do not need to access or use non-ONS 15327
•
applications such as ping and trace route.
You will connect to the ONS 15327's XTC Ethernet
•
port either directly or through a hub.
Complete this task if:
You are connecting from a Windows PC.
•
You will connect to one ONS 15327; if you will
•
connect to multiple ONS 15327s, you might need to
configure your computer's IP settings each time you
connect to an ONS 15327.
You need to access non-ONS 15327 applications
•
such as ping and trace route.
Complete this task if:
You are connecting from a Solaris workstation.
•
You will connect to one ONS 15327; if you will
•
connect to multiple ONS 15327s, you might need to
configure your computer's IP settings each time you
connect to an ONS 15327.
You need to access non-ONS 15327 applications
•
such as ping and trace route.
Complete this task if:
The CTC computer is provisioned for DHCP.
•
The ONS 15327 has DHCP forwarding enabled and
•
is connected to a DHCP server.
Connect the PC and Log into the GUI
March 2003