Table of Contents
Advertisement
I.
Product Overview
The CLC 5100 is the successor model of the CLC 5000/5000+ with print speeds of
up to 51 ppm. The CLC 4000 replaces the CLC 3900/3900+ with up to 40 ppm.
Built with the same proven architecture as the CLC 5000, both models offer high
speed, high image quality, and stable performance, which help to attain lower
running costs. These models incorporate improved capabilities that result in
outstanding image quality, color consistency, enhanced performance, and
productivity. Two new ColorPASS controllers are also available as described on
Page
9.
A.
New Design Features
• Faster output speed for heavier media
• Better color consistency compared to previous models
• Buffer Pass Unit (Standard)
• New large Side Paper Deck-R1 (Standard)
o Coated paper can be used with the Side Paper Deck-R1
• Offset Staker-B1 (Option available at a later date)
• Staple Sorter (Option available at a later date)
B.
Other Features
• New external front cover design
• Auto Duplex from Paper Deck on media up to 163 gsm
• Dual Control Panel option to comply with the 508 Disability Act
• Wider Image Area
• Stack-less duplex capability
• Scan Once Print Many without compression
• Stapler Sorter cascading function (Option available at a later date)
• Finer, Brighter (FB) Toner
• Wide Color Space
• 800 x 400 dpi with Automatic Image Refinement
• Dual Automatic Toner Replenishment
• 11" x 17" full bleed on 12" x 18" paper
C.
Side Paper Deck-R1
The new Side Paper Deck-R1 (standard) has the new "air assist" technology
to help feed a variety of media by blowing air to lift the media into the paper
feed. Heat is applied to the coated media leading edge to dry any moisture
that may have been absorbed in humid conditions.
The new "air assist" technology is only one of several new technologies
integrated into the design of these new CLC products.
CLC 5100/4000 Service Guide
Rev. 0
Service Guide
CLC 5100/4000
October 2003 Page 1
Advertisement
Table of Contents
