Table of Contents
Advertisement
Maintenance 6. Maintenance Parts Replacement Procedures
(5) Loosen a screw holding the CPU board.
NOTE
(6) Place the top panel and secure it using 10 screws.
(7) If you disconnected the following external cables from the CPU board, connect them
(8) Plug in the power connector.
176
Put the CPU board in position and set the
screw.
Make sure the CPU board is firmly
placed.
(Photo shows the holder for the PCI
Board.)
again.
USB device
LAN
Controller starts properly without any vibration or abnormal noise.
Display
COM port
Turn ON the Controller and make sure that the
RC620 Rev.8
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the RC620 CU and is the answer not in the manual?
Questions and answers