Sony MDS-PC3 M-crew Operating Instructions Manual page 26

Creating Your Own Program
(continued)
Checking the contents of the
program
While the deck is stopped and "PGM"
lights up, press DISPLAY repeatedly.
The first several tracks in the program appear in
the display. To see the rest of the program, press
> repeatedly (or turn ./> clockwise on
the deck).
26
Changing the contents of the
program
While the deck is stopped and "PGM" lights up,
do steps 1 and 2 of "Programming the tracks" on
page 25, followed by one of the procedures below:
To Do the following:
Erase a track Press m/M repeatedly
until the number of the
unwanted track flashes, then
press CLEAR.
Erase all tracks Press CLEAR repeatedly until
all the track numbers
disappear.
Press m repeatedly until "0"
Add a track at the
beginning of the flashes before the first track
program number, then do steps 3 to 5
of "Programming the tracks"
on page 25.
Press m/M repeatedly
Adding a track in the
middle of the program until the number of the track
right after the position where
you wish to insert a track
begins to flash. Then press
./> repeatedly (or turn
./> on the deck) until
"0" flashes. Do steps 3 to 5 of
"Programming the tracks" on
page 25.
Press M repeatedly until "0"
Add a track to the end
of the program flashes after the last track
number, then do steps 3 to 5
of "Programming the tracks"
on page 25.
Press m/M repeatedly
Replace a track
until the number of the track
to be changed flashes, then do
steps 3 to 5 of "Programming
the tracks" on page 25.