Advertisement
5) Remove the rear cabinet of the stand/paper drawer and remove the
AC inlet cover.
<1>Remove the four screws that fix the rear cabinet and then remove the
rear cabinet.
<2>Remove the screw that fixes the AC inlet cover and then remove the
AC inlet cover.
<3>Process the AC inlet cover as shown in the illustration.
Cut out.
6) Attach the power supply unit.
Attach the power supply unit to the positioning portion of the multi
purpose drawer and then fix it with three supplied screws.
Screws
7) Connect the power supply unit harness to the PCU PWB of the main
unit of the printer.
<1>Remove the screw that fixes the harness cover of the main unit of the
printer and slide the harness cover up to remove it.
Process the harness cover as shown in the illustration.
Cut out.
Rear cabinet
AC inlet cover
Screws
Power supply unit
Screw
Harness cover
AR-D13/D14/MU1/DC1 UNPACKING AND INSTALLATION-2
<2>Connect the optional power supply harness connector to CN11 (red
connector) of the PCU PWB of the main unit of the printer.
CN11
<3>Reattach the harness cover to its original position and fix it with the
removed screw.
At this time, ensure that the optional power supply harness are
arranged as shown in the illustration.
•Fix the harness securely to the wire saddle.
Optional power
supply harness
2/ Screw
Wire saddle
8) Connect the relay harness of the stand/paper drawer to the power
supply unit.
Connect the relay harness of the stand/paper drawer to the
connector of the power supply unit.
Connector of the power supply connector
Relay harness of the
stand/paper drawer
9) Attach the rear cabinet of the stand/paper drawer.
<1>Pass the cord of the power supply unit through the hole of the rear
cabinet and attach the rear cabinet to the stand/paper drawer.
Rear cabinet
Connector
Screw
Harness cover
Wire saddle
Advertisement
