Advertisement
[6] ADJUSTMENTS
1. Paper guide position adjustment
(AR-D13/D14/MU1)
(AR-P350/P450,
DM-3500/3501, DM-4500/4501)
1) Turn the main switch on while pressing the [MENU] key and
the [OK] key of the operation panel of the main unit of the printer.
2) Press the [MENU] key several times to display
"SIZE ADJUSTMENT A" and press the [OK] key.
3) "MAXIMUM SIZE" is displayed.
Pull out the paper tray and extend the paper guides to the maximum.
Then, return the paper tray into the main unit and press the [OK] key.
4) "MINIMUM SIZE" is displayed.
Pull out the paper tray again and narrow the paper guides to the
minimum. Then, return the paper tray into the main unit and press
the [OK] key.
5) Press the [BACK/CLEAR] key to exit the setting mode.
2. Large capacity tray size setup (AR-D13)
1) Insert the left paper guides and right paper guides to the front and
rear guide slots for the paper size to be used.
Left paper guides
Right paper guides
2) Turn the main switch on while pressing the [MENU] key and
the [OK] key of the operation panel of the main unit of the printer.
3) After pressing the [MENU] key several times to display
"TRAY 1 SIZE SETUP" in the message display, press the [
display "LCC SIZE SETUP" and press the [OK] key.
4) Press the [
] or [
] key to change the size and press the [OK] key.
*
The large capacity tray paper size is A4 or LTR only.
3. Setting the paper size and type
When the paper size or type is changed in a paper tray, set them
referring to the following procedure.
A. Setting the paper size and type from the operation
panel on the main printer
(AR-P350/P450, DM-3500/3501/4500/4501)
1) Press the [MENU] key repeatedly until "CUSTOM SETTINGS"
appear in the message display.
2) Press the [OK] key.
When the [OK] key is pressed, "TRAY SETTING" will appear in the
message display.
3) Press the [OK] key.
When the [OK] key is pressed,the message shown to be left will
appear in the message display.
4) Select the desired paper tray.
Press the [
indicated in the display.
Paper guide
5) Press the [OK] key.
The paper size and paper type of the tray selected in step 4) will
appear.
•If TRAY 1 is selected in step 4), the message shown to the left will
] key to
appear in the display.
6) Press the [
•If TRAY 1 is selected in step 4), the message shown to the left will
appear in the display.
AR-D13/D14/MU1/DC1 ADJUSTMENTS-1
TRAY SETTING
TRAY1
] or [
] key repeatedly until the desired paper tray is
LETTER
PLAIN
] key.
CHANGE TRAY1
SETTING OK?
Advertisement
