Advertisement
8) Attach the rear cabinet of the paper tray.
<1>Pass the AC cord of the power supply unit as shown in the illustration
and attach the rear cabinet with two screws.
Screw
<2>Attach the AC inlet cover to the paper tray and fix it with the removed
screw.
Screw
AC inlet cover
9) Connect the AC cord of the power supply unit to the main unit of the
printer.
Connect the AC cord of the power supply unit to the inlet connector
of the main unit of the printer at the location shown in the illustration.
Then, proceed to step 11).
AC cord
10) Attach the harness cover.
Reattach the harness cover to its original position and fix it with the
removed screw.
At this time, ensure that the power supply unit harness is arranged
as shown in the illustration.
•Fix the harness securely to the wire saddle.
Optional power
supply harnesses
Wire saddle
11) Adjust the position of the paper guides of the paper tray.
Refer to "Setting and adjustment" described later.
Screw
Rear cabinet
AC cord
Screw
Harness cover
Wire saddle
AR-D13/D14/MU1/DC1 UNPACKING AND INSTALLATION-7
4.AR-DC1
<Before installation>
•Start installation after checking that the DATA indicator on the operation
panel is not lit or blinking.
I.T.E.
ACCESSORY
9K11
1) Turn the main switch of the printer to "OFF".
Turn the main switch located on the front of the printer to "OFF".
Then, remove the power plug of the printer from the outlet.
2) Remove the multi rear cabinet.
Remove the two screws that secure the multi rear cabinet and
remove the multi rear cabinet.
3) Remove the AC inlet cover from the multi rear cabinet.
Remove the screw that secures the AC inlet cover and remove the
AC inlet cover.
Work the AC inlet cover as shown in the illustration.
Cut-out
Parts included
Screws (3)
"OFF"
Screw
Multi rear cabinet
Screw
AC inlet cover
Advertisement
