Procedures After A Scan - GE Amersham Typhoon Operating Instructions Manual

6 Operation

6.4 Procedures after a scan

6.4 Procedures after a scan
Turn off Amersham Typhoon
scanner
Follow the steps below to turn off the instrument.
Step
1
2
3
122
Action
Remove any stage from the scanner. For information about cleaning and
storage of stages, refer to
Press the On/Off button on the front panel.
Result: The white Ready LED blinks and then goes out.
Push the power switch on the right side of the instrument to the O position.
Result: The instrument is turned off.
Chapter 7 Maintenance, on page
Amersham Typhoon Operating Instructions 29193226 AC
124.