GE Amersham Typhoon Operating Instructions Manual page 107

Step
2
3
4
5
6
7
8
9
Prepare a DIGE gel for
fluorescence imaging
Follow the steps below to prepare a DIGE gel for fluorescence imaging.
Step
1
2
3
4
Amersham Typhoon Operating Instructions 29193226 AC
Action
Place the titer plate holder on the multi stage.
Close the spring locks that hold the titer plate holder in place.
Insert the glass slides in the glass slide holder.
Place the glass slide holder on the titer plate holder, with the glass slides
facing down.
Open the main scanner door of the Amersham Typhoon scanner.
Place the stage on the stage holder, with the printed side of the stage facing
up, and the handle of the stage facing to the front.
Push the stage all the way into the scanner.
Close the main scanner door.
Action
Place the default guide plates on the multi stage. Align them with the grooves
for the DIGE gels so that they click into place, see
Place the DIGE gels on the stage.
Close the spring locks that hold the DIGE gels in place.
Open the main scanner door of the Amersham Typhoon scanner.
6.2.1 Preparing a sample for fluorescence imaging
6 Operation
6.2 Preparing the sample
Multi stage, on page 55.
107