Storage; Troubleshooting; Disposal Of The Appliance - Silvercrest SBT 3.6 C1 Operating Instructions Manual

NOTE
► To order replacement parts, please contact the service department (see chapter
Service). Please have the IAN number ready (see operating manual cover).

Storage

■ Always protect the micro shaver
■ Store the appliance, the attachments
cleaning brush
■ Store the appliance and all accessories in a dry and dust-free location.

Troubleshooting

Problem
The appliance is
not working.
The appliance
only runs slowly.
The epilation of
the hairs is very
painful.
Not all hairs are
plucked.

Disposal of the appliance

To dispose of the appliance in an environmentally friendly manner you must remove
the battery from the appliance.
RISK OF ELECTRIC SHOCK
► Disconnect the appliance from the mains power supply when you remove the battery!
CAUTION – PROPERTY DAMAGE!
► Remove the battery from the appliance only if you want to scrap/dispose of the
appliance! The appliance is permanently defective after you have removed the
battery!
│ GB │ IE
■ 32
with the supplied protective cap
and the mains adapter
Cause
The battery is empty.
The appliance is
defective.
The battery is empty.
The hairs may be too
long.
It is possible that the
hairs are too short.
You are working too
fast.
/ / / , the trimming templates
in the storage bag
Solution
Charge the battery.
Contact the Customer Service
department.
Charge the battery.
Shorten the hairs to about 0.3 - 0.5 cm.
See also the section "Tips and Tricks".
The hairs should have a length
of 0.3 - 0.5 cm.
Move the appliance more slowly over
your skin.
.
, the
.
SBT 3.6 C1