Setting The Truread Mode - Omron BP5450 Instruction Manual

Platinum upper arm blood pressure monitor
Hide thumbs Also See for BP5450:
Table of Contents

Advertisement

2. Preparation
2.4

Setting the TruRead Mode

The TruRead mode takes 3 consecutive measurements. The monitor
will inflate, take a measurement, and deflate - 3 times, separated by a
short interval between each measurement.
The TruRead mode is set to "oFF" by default.
1. Set or bypass the date and
time settings.
Follow the steps in sub-section 2.3
and set or bypass the date and time
settings.
After it is completed, the "
symbol appears on the display.
2. To enable TruRead mode, press the
button.
"
To keep TruRead mode disabled, press the
surface of the monitor).
3. Press the
If "on" is selected, the interval setting appears.
20
" will appear in the display.
button to confirm.
"
or
button (rear

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BP5450 and is the answer not in the manual?

Questions and answers

Terence Davidson
January 25, 2025

Why is my machine not turning on?

1 comments:
Mr. Anderson
February 10, 2025

The Omron BP5450 may not be turning on due to the following reasons:

1. Depleted Batteries – Replace all four batteries with new ones.
2. Incorrect Battery Installation – Check that the battery polarities are aligned properly.

If the issue persists, remove all batteries, wait for 30 seconds, and reinstall them. If the problem continues, contact customer service.

This answer is automatically generated

Terence Davidson
January 25, 2025

My moron BP 5450 is not turning on when I changed the batteries

1 comments:
Mr. Anderson
February 10, 2025

Your Omron BP5450 may not be turning on after changing the batteries due to one of the following reasons:

1. Depleted Batteries – Ensure you are using new batteries.
2. Incorrect Battery Placement – Check that the battery polarities are properly aligned.
3. Residual Power Issue – Remove all batteries, wait for 30 seconds, then reinstall them.

If the issue persists, contact customer service as mentioned in the manual.

This answer is automatically generated

Don Koch
January 26, 2025

I need to delete only 1 reading as my wife forgot to switch to person 2 as I **** person 1.

1 comments:
Mr. Anderson
February 10, 2025

You cannot delete a single reading on the Omron BP5450 blood pressure monitor. The device only allows you to delete all readings stored in memory at once.

This answer is automatically generated

Mary C
January 28, 2025

How to reset the monitor

Art Schievink
January 28, 2025

On page 10 of the manual: item (S) is not explained. Where can I learn what that symbol means?

1 comments:
Mr. Anderson
February 10, 2025

The Omron BP5450 manual directs users to visit OmronHealthcare.com/symbols-glossary for symbol information. The meaning of symbol (S) is not provided in the available context.

This answer is automatically generated

CLARKE
February 6, 2025

How to print out BP readings from Memory

Carol Balone
February 17, 2025

What does the heart and number 3 mean

Carl McHenry
February 27, 2025

Can't pair bp5450 with Iphone 13. I deleted Omron bp5450 app on phone and went to app store to download Omron bp5450 app. I don't see it in my bluetooth accessorys

Marianne
March 4, 2025

how to recalibrate Omron BP5450 when results are 10 to 20 degrees off

Rob D
March 11, 2025

Where can I get the EKG device?

Table of Contents

Save PDF