Setting The Truread Mode - Omron 10 Series Instruction Manual

2. Preparation
2.4

Setting the TruRead Mode

The TruRead mode takes 3 consecutive measurements. The monitor
will inflate, take a measurement, and deflate - 3 times, separated by a
short interval between each measurement.
The TruRead mode is set to "oFF" by default.
1. Set or bypass the date and
time settings.
Follow the steps in sub-section 2.3
and set or bypass the date and time
settings.
After it is completed, the "
symbol appears on the display.
2. To enable TruRead mode, press the
button.
"
To keep TruRead mode disabled, press the
surface of the monitor).
3. Press the
If "on" is selected, the interval setting appears.
18
" will appear in the display.
button to confirm.
"
or
button (rear