Print Results Automatically
Check the Print Results Automatically option to have all results automatically printed.
Note: If this option is selected, sample details cannot be edited. Refer to "Details Screen Buttons" on page 7-3
Set up Printer (Admin Only)
1. Connect a printer to the instrument.
2. Load 8.5 x 11" paper onto the printer.
3. Power off, then power on the instrument.
4. Log in as Admin.
5. Select Utilities > Printer. Printer setup screen is displayed.
6. Select Refresh option.
7. Select the correct printer driver and listed printer device for the connected printer.
8. Select Submit option.
9. Printer is now set up for use with the instrument.
10. Printer setup screen allows ONLY one printer to be set up for use at any time.
9-6
System Settings Screen